- Dit onderwerp bevat 5,102 reacties, 936 deelnemers, en is laatst bijgewerkt op 8 jaren, 2 maanden geleden door .
-
<i class="fa fa-comments-o" aria-hidden="true" style="font-size: 20px;"></i>
-
Meer olie zal alleen maar je bougie laten dichtkolen. Gewoon 1 op 45-50 mensen zoals normaal (2%) is echt voldoende. Dat zou ik doen.
46 Pinasco, Malossi RV, Schijfrem, Fox Vario
Gele RacefrikandelBeste mede forumleden, ik heb nu een nieuw blok opgebouwd maar zou niet weten met welke sproeiermaten ik zou moeten beginnen.
– Reedvalve Elec.
– Malossi volle wangen krukas p10
– 17 mm dellortho carb
– 43 mm DR Evoalvast bedankt,
b.baensOke heb het gelukkig er nog niet bij gegooid! Bedankt voor de tip
welke sproeier ben ik nodig bij de volgende setup?
41mm zeta
12/12 carbarateur
Proma/tecnigas cc
Malossi luchtfilter
std carterBij voorbaat dank
Nick
62-66
Hello!
Can you tell me which nozzle do I need for the following setup ciao PX eco model?
– Cylinder and carter: standard
– Carb : dellorto 13/13 with Malossi air filter
– Pulley : standard 95 mm
– Exhaust : Gianelli FIREAt that moment I have 0,56 but the acceleration is poor.Do you think I need a smaller one. I also want to change the standard pulley with 80 mm but I am afraid that the acceleration will be then even worser.
Thank’s for the answers
@ Rubymax
I think the .56 jet is more or less ok, but you just took the wrong exhaust for this setup. In my experience, the Gianelli Fire is an exhaust that is not made for standard setups.
This exhaust simply does not have a lot of acceleration power on pulley setups because it needs high revs to perform.
Wilk1985 :
@ RubymaxI think the .56 jet is more or less ok, but you just took the wrong exhaust for this setup. In my experience, the Gianelli Fire is an exhaust that is not made for standard setups.
This exhaust simply does not have a lot of acceleration power on pulley setups because it needs high revs to perform.
Wilk 1985 you are 100% right about the acceleration power about Gianelli fire unfortunally now is too late because I just get it from Easy parts.Nl yesterday. I also replace my standard clutch segments with malossi special clutch segments with included black springs but I replace the black malossi springs with the original today, because I think they are too tight for my set up.
Otherwise I am satisfied with final max speed but it takes time to get it.Do you maybe have some other solution what can I do ?
Best Regards
rubymax :
Wilk1985 :
@ RubymaxI think the .56 jet is more or less ok, but you just took the wrong exhaust for this setup. In my experience, the Gianelli Fire is an exhaust that is not made for standard setups.
This exhaust simply does not have a lot of acceleration power on pulley setups because it needs high revs to perform.
Wilk 1985 you are 100% right about the acceleration power about Gianelli fire unfortunally now is too late because I just get it from Easy parts.Nl yesterday. I also replace my standard clutch segments with malossi special clutch segments with included black springs but I replace the black malossi springs with the original today, because I think they are too tight for my set up.
Otherwise I am satisfied with final max speed but it takes time to get it.Do you maybe have some other solution what can I do ?
Best Regards
There are 2 things you can do:
1. Get an exhaust that fits your setup (Like Citypower of Leovince Circuit)
2. Get a setup that fits your exhaust (+41mm cylinder)
If you have any more questions please start up a new topic in the English section because this section is meant just for small jet related questions.
Welke sproeier ben ik nodig?
Ik ga met mijn setup naar een 50cc snel van het merk dr
Ik heb op moment 41 daar loopt hij goed opWelke sproeier voor deze setup>>>? – 50cc standard
– ECO zuiger
– Carters std – original
– 13/13, malossi filter
– GIANELLI city power
– Poelie 80 mm
– CiaoWelke sproeier heb ik nodig?
13/13
70 CC mallossi
Verder alles standaard.@sen-der2, als hij goed loopt waarom veranderen? Check je bougiekleur
@rubymax, 52-54
@SnoopJ, 60-62
46 Pinasco, Malossi RV, Schijfrem, Fox Vario
Gele RacefrikandelWelke sproeier voor deze setup CIAO:con>>>?
– cilinder : OLYMPIA kit 43 (65 ccm)
– carters: 12 mm inlat
– 13/13 , malossi filter
– uitlaaat: GIANELLI FIRE
– poelie: 80 mm@rubymax, 60-64. Ligt eraan of je carters zijn bewerkt of niet.
- Het onderwerp ‘‘Welke sproeier heb ik nodig?’ topic’ is gesloten voor nieuwe reacties.