im really happy now with the Performance

and the top Point i shorted my frame so that the belt sits Perfect now.
Down At the Fotos you See a before and After picture from the clutch.

first ride, i had to Chance the waights. They Were 1 gramm to light After shorten the Frame.

then the next ride. But i did not get over…[Lees meer]

next week im going to the Münster Tour at Wevi.
So i have to pause the house renovation and start to make some maintenence work at the grey devil.

Actually i have more than 400km with the new Polini Sport on my Speedometer and everything runs already fine and smooth.
there is only one thing.
when i push my bike without running engine…[Lees meer]

1. First rule for tuning:
the screw belongs on the carburetore!
And NOT IN the carburetore!

2. i changed Main jet, and some little other things.
After that I removed the rolles, and the transmission is a little longer now. But there are another mm missing!
But the top speed is now a little better. Before I had no Handy with me and…[Lees meer]

i drove jesterday around 40km and rested the pump.
first with a Pulley 60mm on the pump and later with a 48mm one.

I never get above 90 degree!
Not it is around 75-85 degree. Depends on how aggressiv I drive 😂

i think it was a good idea to c…[Lees meer]

@zeven: you are right! No question.
I did this excenter in the inside but I can’t do it on this wise for 100% because I don’t have the room. Otherwise the pump becomes way to big!

If you zoom…[Lees meer]

Or how do you think?

Waterpump runs also. I will find our the next days if the cooling is getting better

To the Belt: i will figure out the lenght between crank and clutch shaft than you can look yourself if the Beld can fit or not. Because 35€ for a belt like the Malossi one is not very cheap at all!

@Ties: same like with y…[Lees meer]

some news.
i remounted the Polini Sport but in brand new. I modifieyed some things like the exhaust with a flange so the problem with the pissing around the outlet will stop 😁

i also modified my clutch.
i turned the clutch brackets otherwise.
and again a difference like day and night. Now there are also wheelys makeable again 👌
next…[Lees meer]

and a good tip is also to use Loctite for shaft and hub high strength, it never will turn again from itself. hehe

Did anybody hear somthing about a new exhaust for the DESP?
I mean Malossi brought now a new Ignition, a new crank case MP One and a new DESP Zylinder out and no new Exhaust which is almost the…[Lees meer]

i´ve got now something new.
The 80mm and 85mm are now available in black anodized.
Same price like the other one.

@Sickx: i will send you a PM

also i want to say on this way thank you all guys who votet so much for all the other guys and girls and me?!
I never thought that there is so much response on the voting!
its great to see that there is so much love and detail work in all those projects.
lets hope it will never end like…[Lees meer]

But i found a solution. Now im an artist and got my own company 🙂 JMB Parts hehe
so now the shipping costs are 3,5€ for 1-5 Pulleys.
From 5 beginning it is a little more but not too much more.

and just for information:
in 2-3 Weeks the fist black anodized Pulleys arrive in die diameter 80 and 85mm

@zevenenergie: i dont have…[Lees meer]

its long time ago since i wrote the last time.
now i got some new or better said some news for you 🙂

i modified the front variator – i mounted one from BGM for aerox.
Why i did this?

this is easy to tell you.
With the standard polini or malossi variator for ciao i had the problem that the slope where the rolls are running was…[Lees meer]

since the 1.1.2019 its not allowed any more to send small things per letter to you like my Pullys.
The price for sending to NL was before 2019 3,49€ for me.
Not it is actually 9€!!!!!!
and when its above 500 gramm it is 16€!

if you want to buy Pullys from me i have to find another solut…[Lees meer]

i ordered this length without knowing if it fits. I will try and error 🙂

i just ordered a new Belt…[Lees meer]

I think You will feel The difference immediatly If You had Mount a Tuning pulley before.

holds a hole life 👍

i did it before for a Friend. He had  incedible 22,5ps on a dyno and my shaft didnt die:-)

that is made in Germany 😂

The Stage clutch is st…[Lees meer]

I changed my Clutch to a Minarelli one and made some parts by myself

Here a short video

The difference is soo huge!
No wobbling any more with the rpm
its from the start to the endspeed just perfekt!
now i just need a new belt and set the waights a bit different!

awesome!
I will try to produce…[Lees meer]

!!!Only 20€ each!!!

Doenst matter how much you want!
Shipping costs depends on how much you Order.
1-3 peaces 3€
4 and more 7€

every sice on Stock!

Verkrijgbaar in maten
60mm, 65mm, 70mm, 75mm, 80mm 83mm, 85mm, 90mm, 95mm, 100 en 105.

but i would bet its a m10x1 thread

Do you also want 7mm?

The rest we can write per PN 🙂

im searching for a pair of 5 spaark rims. Front and Back.
Condition of the paint doesnt matter.
but it has to run straight and no deep scratches.
pleas offer what You got 👍

it Has to be shipped to Germany 🙂

thx a lot guys!

@hansieb: thx mate

@KillerNoway: Porn on 2 wheels 🙂 thx a lot

this should be no problem, it just take a little time to manufacture some new because the 65 are almost out of stock.
I will send you an PN.

@AA-T: you dont need to, drives very smooth

@Martino: its not the s6 any more, i changed it to a yasuni R i think.
The C16 runs not that good, for this exhaust the timings need a mm more up i think.

@AAT: jes im thinking so too.
But sure is that the new Kit goes immideatly in my shelf and i dont know jet if im using this zylinder again any more because the new Airsal is…[Lees meer]

Before 2 Weeks i had the Problem that my upper piston ring was turning around so that the open pint of the ring gets into the outlet and break something out of my Piston.
Now i brought it back to the shop and they are going to send it to Polini Italia.
In my…[Lees meer]

i wanted to make a big license plate on my moped. i startet to talk with the insurence and everything was makable but after that i met a friend at the scooter shop and he was asking me why im going to do that.
im still not legal.

the end of the song was that he gave me some contakts where i can…[Lees meer]

I dont think that i can come to the vcm. i planed some other stuff on that date. 🙁

my garage is looking like a bomb explodes, no time at all to clean up for more than 3 month.
i can tell you im so happy that its almost ready.
some things have to…[Lees meer]