this wasnt the finish 😀 this is almost the finish hehe

the membran fits like a glove, now its time for the Cab adapter plate.

after that i will make the screw holes in the case and than its ready for assemble wuuhuu

@AA-T: ah jes i know what you mean, we call it in german “gegenlauf fräsen” and “gleichlauf Fräsen”.like Crullie said, in the most of times i know what im doing because im a industrial mechanical and learnd it. I didnt mean that i have to learn the hole milling prinzip, i just need to learn lets say what the machine likes and what she dont like :…[Lees meer]

Oh sorry thx for attention 🙂 no i dont need the full speed of the Pump.

i mean 2 rounds at the Engine is 1 at the pump. So half turns as at scooters.

i will reach that the pump is pumping enough for reducing the heat and the so that the belt is not slipping at higher rpm. otherwise the belt will not live very long.

i think the polini LC pump…[Lees meer]

@AA-T: the ratio on scooter is 1:1 and im going to do it minimum 1:2 ( 2 Engine 1 Pump)

High RPM is not what i want. max 10k smooth going forward.

jeahhhh you are right

@zevenenergie: you still want more Pictures of the Mill? Its a Bernardo FM55 HSV

@AA-T: Big thx for fixing 🙂 and thanks for the flowers ^^ i also love my new Mill.

I would liked to had it long time before, it makes everything easyer i would say.

Doesnt fit? Mill it. Doesnt look good? Mill it

and it goes…[Lees meer]

WHOOP WHOOP my Mill arrived and i immediatly started with the Pump 🙂

Verry nice i can tell you

WOW that really looks great.

i already looking forward to hear the sound of that BEAST.

You need a sticker on the Carburator that means: pay atention to your kids or they will be swallowed

@lightlord: atm its only done with my Dremel and the Lathe 🙂 so not really alot special tools. 😀

@tiesman: Thx a lot, i think everyone wants to see a building from zero to the finish product.
specially when its not done by anyone before or respectively it is done before but the people dont show how its made.
Alot of guys are making a…[Lees meer]

today it was time for some porting. Damn thats big i think and there is alot of room for more.
now it needs only some finish.

Today i made the hole aluminium parts from the Rotor new. now it fits like a glove.

And it sparks for the first time. inkluded 18V DC for light. but my friends told me i have to measure it with a lamp on it 😀
Tomorrow it goes on with the Kick.

THX Crullie, my tools are not doing what i want anytime, but sometime hehe

lets go on. there is no time to waste 🙂
Im waiting for my mill, without it i cant finish this project 🙁

for the next steps i need an old kick crankhsaft. a big THX to Erwin, he will give me one WHOOP WHOOP

i also had to make it here under the rotor a bit…[Lees meer]

Great to see Crullie 🙂
I hope it runs better now, specialy the smaller diameter.
These ones are the realy bad ones.

@lightloard: Thanks very much for the feedback 🙂 does it also rum more smooth?

Vanaf vandaag zijn de mono-schijven verkrijgbaar in maten
60mm, 70mm, 75mm, 80mm 83mm, 90mm en 95mm.

Sorry, now the Pictures are working.

@Polini Citta: its better than my english or even more as my durch hehe

@Jodojodo: write me please a PN.

regards
Marc

Hi Joor,

i hope you will have a lot of fun with this new Pullys.
No wobbling and no breaking any more.
just smooth driving 🙂

Hey guys, please put ne also in the List!

Hey Guys,

im sorry to say it but i cant participate ! :'(
is anybody here who is interested in a place for the VCT Tour?

write me a pn and we can arrange the rest! BUT your bike has to run good :thumb

greetz Marc from Germany

huhu together

dartfreak do you know why the list on PMT and VC.nl are different?

this will be a verry extreme tour again 😀
im verry exciting to see you crazy guys again wuhuuuuu 😛

now my video is also finished !

[youtube=1D13dil86MY]