[KillabeeTopic starterBerichten: 15]

Hello:-)

The Calibrata runs with the 60ccm H2O Kit from Polini very very nice.The Calibrata have very Power and runs ca. 10 Km/h faster as the Technigas Double Pot.

Im very amazed that this Exhaust by a little 60ccm Kit so good with the Power and Speed is:-)

Update Kickboard Conversion:
Today is my Laser X Pro Exhaust for my Scootert Kickboard Conversion arrived and i have mounted for few Minutes and this Exhaust is also very nice and the Kickboard Conversion runs now ca 80 – 85 Km/h and its very funny:-)

Here a Pic with the new Exhaust:

Update Piaggio Rasta SI:
I have mountet on my Si a self made Footboards with original Piaggio SI Carrier Parts and is not yet complete.The Footboards will a new Paint in Black!

Here the Pics:

Many Thanks and Regards from Switzerland Daniel

[KillabeeTopic starterBerichten: 15]

Hello:-)

Many Thanks for your positive Feedbacks:-)

I have a new Project:

Its a MBK 50ccm Scooter as a Kickboard Conversion:-)Its very funny and make 70 km/h.

Is mounted a Polini Vario,Malossi Clutch,17,5mm Carburetor,Malossi Connection and Malossi Membran Block.

The mount Exhaust is not very good and i have buy a Laser X Pro Exhaust and this is very nice:-)

Here the Pics from the Scooter Kickboard Conversion:

Here the new Exhaust:

Update by my white H2O Ciao:
I have buy a very nice and cheap Simonini Calibrata Exhaust (just 65 Euros:-))) The Calibrata is in new Condition and im very happy:-)

In addition i have buy for my white Ciao deuce oldscholl Whiteband Rims (Not yet mounted).

Here the new Pics:

Here a Pic from the Whiteband Rims:

Regards from Switzerland Daniel

[KillabeeTopic starterBerichten: 15]

Here new Pics form all my Mopeds:-))

Regards from Switzerland Daniel

[KillabeeTopic starterBerichten: 15]

Many thanks for your positive Feedbacks:-)

@erwinko:

I have buy the Technicas double Exhaust at E Bay Germany for 75 Euros:-)There are the Exhaust also for Puch Maxis!

This Exhaust is more for Show and have enough Power for my little 60ccm H2O:-)

Regards from Switzerland Daniel

[KillabeeTopic starterBerichten: 15]

Hello from Switzerland!

Sorry for my longer Absence!

My Password from this Site was permanently error:-(

My “Green Devil” its finished soon and here are the newest Pics from my “Green Devil”:

Here the newest Pics from my white H2O Ciao:

Here the newest Pics from my Yellow Intruder:

Group Pics:

Soooo….this was a lager Update from my Mopeds:-)

Regards from Switzerland Daniel

[KillabeeTopic starterBerichten: 15]

Here are the other Pics…..

The Engine is a 75ccm Zylinder!

Regards Daniel

[KillabeeTopic starterBerichten: 15]

Hello!

Yeah!The 5 Spoke Wheels from Fredzzz is arrived today and are very nice Wheels! (Many many Thanks to Fredzz:-)

Here the newest Pics from my Project:

The Frame ist not yet complete paintet,that i have not enough Kawagreen Paint!

Regards Daniel

[KillabeeTopic starterBerichten: 15]

Hello:-)

Here is my new Ciao Frame:-)

Is not a PX but is a P Frame with Strut Bar and the Frame is from previous Owner new painted in Orange!

I must to polish the Frame and i will to paint in Kawa Green:-)

Here is a Pic from my new frame without Cracks:-)):

Regards from switzerland Daniel

[KillabeeTopic starterBerichten: 15]

Hello:-)

Yes,the Gilera Moped its sooner for sale in Stores.

This Mopeds are in Switzerland also very rare and i to have this Gilera Moped as Gift from my best Friend Oliver.But the Gilera was very in bad repair!

I have received today a Packet from Germany with the Kawa Green Paint:-)The Lime Green is very nice and i have today varnished my rear Plastic Fender and Silencer from my Arrows Exhaust!

My Ciao PX Frame have sadly a little Ckrack under the Tank:-(I wouldnt like welding the Crack and i search me another Ciao Frame without Crack!

Here a Pic from my painted Arrows Exhaust and Plastic Fender:

@Frezzz: With your 5 Spoke Wheels and the Lime Green Paint will my Ciao a very nice Project!

Update from my “Green Devil” coming soon:-)

Regards from Switzerland Daniel

[KillabeeTopic starterBerichten: 15]

Hello:-)

Many Thanks for the positiv Feedbacks:-))

@iaccaloco: I dont speak italian – i come from German Swiss and speak swissgerman (mundart).

Your Homepage is very very nice and i like it….:-))

Regards from Switzerland Daniel

[KillabeeTopic starterBerichten: 15]

Yes,its a very nice Exhaust,but the Double Pot is more for Show:-)

I would like for a long Time the Simonini Calibrata – this is also a very nice Exhaust and give good Power,but the Price from this Exhaust is very expensive!

Here a Pic from the Calibrata:

Here a pair of Internet Addresses from Swiss German and Italy Tuning Shops:
Mopshop Germany

Cycle Tech Switzerland

Scooterama Switzerland

Hübi Tuning Switzerland

Mofa Cup Switzerland

Sprocatti Motori Italy

Regards from Switzerland Daniel

[KillabeeTopic starterBerichten: 15]

Hi Fredzzz:-)

The new Intruder Kit (from Ricardo.ch) have costs 300 Swiss Francs (ca 200 Euros)

The old Intruder Kit with the special Proma Cirquit (from E Bay.de) have costs 120 Euros

The Polini H2O Kit (from E Bay.de) have costs new 125 Euros and is a very nice Price

The Simonini H2O with Compressor Kit (from E Bay.de) have costs complete 360 Euros

The Intruder Kit have a very great Power,but very delicate,because the Cylinder have no Guidance at the Engine Case (keine Zylinderführung im Gehäuse daher sehr unstabil)

Here is nor a Pic from my new Exhaust:

Have you see the PM with the Shippingcosts to Switzerland???

The Speed from my Mopeds are hard to promise,because i have no Speed Indicator!

The Intruder Ciao makes ca 85 Km/h and have very Power with the Vario and 13/13!
The H2O Gilera makes ca 75 Km/h
The Piaggio SI makes ca 65 km/h and have with the original Clutch and Pulley very Power!
The H2O Ciao makes ca 70 Km/h
The Malossi Ciao (black) makes ca 90 Km/h with big Clutch and little Pulley (New is a Racing Vario with 10,5 : 1 Vario Gear / Kawasaki Lime Green Project)

Regards Daniel

[KillabeeTopic starterBerichten: 15]

Hello Peopels:-)

Many Thanks for the positive Feedbacks and to be glad:-)

@Fredzzz: Ja genau,die 5 Stern Felgen kommen auf das Kawasaki Lime Green Ciao – die Felgen werden dann aber wohl in schwarz lackiert!

Noch zur Frage wo ich herkomme:

Ich komme aus dem Kanton Solothurn – das ist ca 30km von Bern entfernt!

@All: The Proma Intruder,Eurocilindro Membran Carter,Polini H2O Kit,Eurocilindro Compressor Kit with special Crankshaft,Simonini H2O with 28mm Outlet and the Plastic Parts (Racecasings + back Fenders) are very rare Parts and i have search a very long Time for this Tuning Parts!The most Parts i have found on E Bay Germany and Italy or Ricardo Switzerland (Auctions).The Proma Intruder Kit and the other rare Racing Parts is no longer available on the Tuning Shops and to get not longer produced:-(
The Plastic Racingcasings and the back Plastic Fenders is also from E Bay and is from the 80s:-)

Here is a Pic from another rare Plasticcasing from me:

Here Pics from the Eurocilindro Compressor Kit Crankshaft:

Here Pics from the two Intruder Engines:
(This Intruder Kit is new!)

(This Intruder Kit is used!)

Here is a Pic from my Polini H2O Kit with Malossi MHR Crankshaft (The polini H2O Kit is new!):

Here the Pics from my Work Room:

Here a Pic from my new mecanical Brake Disc from the 80s:

And here a Pic from my Lightcasing of my Polini H2O Ciao with Grafitti Sticker (Custom Product from me)

Here in Switzerland is the Police very rigorous and i drive my Mopeds on private Streets and have no Number Plates!

The Polini H2O Kit have 41mm and is ca 60ccm
The Simonini H2O have 42mm and is ca 62ccm
The other Polini Kit have 46mm and is ca 73ccm
The Malossi Kit have 46,5mm and is ca 75ccm

Many Thanks for you continue Feedbacks and Regards from Switzerland Daniel

[KillabeeTopic starterBerichten: 15]

Hello Fredzzz:-)

Many Thanks!

I have send you also a PM with the Shippimgcosts for the 5 Spoke Wheels to Switzerland!

Have a nice Day and Regards from Switzerland Daniel

[Gebruiker]

<i class="fa fa-comments-o" aria-hidden="true" style="font-size: 20px;"></i>