What cylinder and lc kit? Polini?

ArvidW :
Laten we het erop houden dat het in ieder geval geen plug and play is. Je zit bijvoorbeeld met een 46mm slag krukas en een cilinder die ontworpen is voor 39.2mm slag.

I’ve done the modifications except for the portlowering.

I’ve milled the adaptorplate , the squish is set to 0,5mm with thinnest gasket.

I also milled topchamber…[Lees meer]

550 euro is my absolutely last price , since I need the money.

Mark Lundahl :
Nice engine….

Does everything works??

Do you know were you can buy spare parts for the engine??

This is not a running engine.

You need to lower the ports so the piston is in horisontal with the ports in bdc.

You need to buy new gaskets and screwset (about 30 euro max)

The shipping cost is 155 euros incl exhaust.

(600 euros incl)

bentwi :
The clutch of the vario
Is it 90 or 100mm?

90 I think

Lowered price by 100 euros

Buy Sprocatti carter , crankshaft and ignition for 250 euros.

I got it started yesterday for like 1,5 second , Way to big jet and way too much squish, my adjustable jet leaks gas so I wont use that.

// Sebbe

*plz dont put updates in the topic title, thx.

Ordered a new R/T Cylinder … Arrives at tuesday.

This project is still going but slowly , I’m ordering cylinder next week.

Then I need forkcrown for citta and I’m gonna order small things like clutchsprings , tiretubes etc.

I’ll be there, Maybe I’ll bring the citta if I’m allowed to drive.

Thank you guys for answers 🙂

I’ve bought a minarelliclutch , a 1:6:7(i think) gearing , a minarelli gear axle and I’ve modified the “brug” so my sprocatti inlet fits. I’m going to do the same on the ignition side since I think the space between rotor and frame will be too small.

Left to buy:
Cylinder
Delta clutch
Wingbell or R/T bell

More pics for the people , the finishing result could be better but its still sprocatti 😉 Swedens first Sprocatti carter 😀 The carters halfs doesn’t match 100% I think its a big simonini carter that have been modified ? They have the same “wings” around it atleast.
I will have to get it tuned since the transfers is so bad and probably too…[Lees meer]

nejc93 :
this is sporcatti albero corsa 44??

Check your pm.

Got my stuff today 🙂

Simonini crank?

Martino :
I prefer you used your older topic with the same title, 😉 but even though the the clutch rotates differently it still works.
Tonni is actually busy changing the way the segments move so they pivot the other way around.

Hmm okay , you can remove this and I’ll write in the other ?

ritze :
that crank is nog going to survive that 😛
omg but looks promissing.

do you also got plans for tuning the disk?. maybe you sould get more then one disk to tune them differently
if that is possible

greetz

Not going to survive ? It takes 18k rpm , my bb86 will do around 15k..

hansieb :
Will sprocatti also put this engine together, or is it a Ikea package ;)?

Ikea ?

It will come as loose part, I’ll put a Malossi bigbore 86cc in it.

// Sebbe

Nonono , don’t missunderstand this guys , I have not carter etc at home , sprocatti still has them .. I got this picture as a proof that the stuff exists , I’ve sent money to them about 4-5 days ago or something .. Im waiting for them to send.