Bought a citta chassi off Spulleke here @ V-c.nl and a jollymoto js90 pipe from a swedish guy , the pipe is coming next week and the citta week after that probably.

vespa rider :

Kamelen :

vespa rider :
very nice men !

my neigtbour drives with 70 cc R/T cilinder on his aerox, its very fast faster then the malossi 7t.

i hope to see more from this project 😉

Whats the rest of his setup ? 😛

I guess vforce3 , 28mm R/T PWK , S6/yasuni/roost R/T or c30 ? Stage6 spacer ? HPC crank ?

Tell me more…

[Lees meer]

Delete post

Waiting for my ivanobell.

I also sold my R/T, Im going for 2fast or bb86, we’ll see.

ritze :
if you pull that together you`ll be fine 😉
uuhm, just thinking with you, what is your goal speed?

that cilinder should be running @ 12.000+ rpm, so that in combination with vario 1/10.5 wil give a speed of around 100 kmph
i drove with that vario setup 10.120 rpm @ 88 km/h, maybe you can use this information

by the way, you make…

[Lees meer]

Regular Contact “punts” gets overheated and burned pretty fast.

// Sebbe@mnf

pepko :
have you ever heard of copy and paste? 😛
it will save you a lot of explaining efforts

Well , Swedish and english doesn’t match 🙂

ritze :
very insane setup youre going for,
but is 44mm crank not too much?

i always thought that mina engine`s have got like a 39/40mm stroke length

That’s right, they do have 39,2mm.

I really don’t want to explain it now xD Did it like 20 times on other forums 😛

A little update so you guys know how things are going.

I received my 24mm pwk carb, my wheels is probably coming tomorrow, I will get a ajustable “sproier” for my pwk this weekend, I reserved an Ivanobell and I bought an r6 brakecaliper which probably is sent tomorrow and received @ Friday.

// Sebbe

misterd11 :
how are you going to change your frame for the cylinder+ head, and are you going to make holes for the watertubes running trough your frame?

The Cylinder will fit into the frame in width and height , I just have to cut out the ignitioncoil “hole”, on the right side where the water tube will go , I will cut out the like a “U” from…[Lees meer]

Delete this post

ArvidW :
Yes, and as far as I could measure this 44stroke simonini crank has a 87mm rod.

The diameter of the crankshaft is bigger than normal: 74mm instead of 70mm so you will need to mill your engine (except for simonini engine)

Thanks for your help guys !

🙂

Delete this post

vespa rider :
very nice men !

my neigtbour drives with 70 cc R/T cilinder on his aerox, its very fast faster then the malossi 7t.

i hope to see more from this project 😉

Whats the rest of his setup ? 😛

I guess vforce3 , 28mm R/T PWK , S6/yasuni/roost R/T or c30 ? Stage6 spacer ? HPC crank ?

Tell me more 😉

Update with cylinder and some more stuff.

Some new things for the bike:

E85 has a Octanevalue of 104 RON while “normal” fuel has 98 octane so yes , it should higher the performance of your engine

// Sebbe @ MNF

Edjuh :
Interesting setup you’re creating, I’d be glad to see your progress on the engine work.

Why a 16 and a 17 inch wheel?

Good luck

Not decided , either 10 spokes or 5 spokes.

Depends on what comes up.

EDIT: Decided for 5 spokes.