You mean at the portmap? I don’t know, but MoafFreak was very fast and his engine ran very nice with that. 🙂

PS. At my old Eurocilindro is the outlet top a bit low, too if you compare the portmaps.
[url=http://www.postimage.org/image.php?v=Pq2OhVAS][/url]

No, those are really the timings when the outlet of the cilinder opens/closes or the ports of the cilinder open/close.
Those are not the crankshaft timings. If you don’t believe it I can make a little film for you.;)

I think this one will run nice and fast.:thumb

my 41mm / 60ccm DR

The 41mm is the rarest cilinder of the DR-series and is not in production any longer.
The layout is a bit similar to those of Athena. Nice performance through all rpms and the well known good
quality of DR are typical for this cilinder.
The piston has one L-Ring. It runs really good, 70km/h no problem.

Technical…[Lees meer]

@crossfreak: Thank you, but Arvid already done this, like you see it. 😉

@Arvid: Yes, but those membranekits are very expensive an it ist hard to find a housing that fits.

We will see, I am looking for some stuff.

Yeah, I have thought about making a housing for those membranes of my Blata rep.
[url=http://www.postimage.org/image.php?v=aV1VchX0][/url]
This is a lot of work and I don’t know where I can get a housing like this one from abige.:(
So I have to look for a good solution.
Next time another side inlet will follow, this is just a prototype, kinda…[Lees meer]

Yeah.
I think if it works it will run very nice.
I just had some ideas for the inlet system.
[url=http://www.postimage.org/image.php?v=gx1gWXni][/url]
[url=http://www.postimage.org/][/url]
[url=http://www.postimage.org/image.php?v=gx1gZ2zS][/url]

We will see us at the VCT ’10.
But I will drive with the same engine as ’09.
Today I just thought about how I could to it better and how I could improve the performance.

KLICK

http://vespa-ciao.nl/datas/users/3108-000_5735.jpg
http://vespa-ciao.nl/datas/users/3108-000_5740.jpg

Today I was a bit bored and so I decided to tune a bit and do something new.
I think this is not bad for my first try, but the shape is very different to make, because you can break through nearly…[Lees meer]

Thanks a lot!
I reached nearly 86 km/h or 85 GPS.
You can ask Hansieb, I was a bit faster as he was.8)
My setup at the VCT was:
– tuned carter
– tuned DR evo
– DR cilinderhead
– tuned crankshaft
– 13/13 Dell Orto
– Malossi airfilter
– contact ignition with 700g flywheel and special ignition cable
– SKF 6202 C3 crank bearings
– 6,5…[Lees meer]

Here a litle trailer of what is coming new. 😉

Vespa drivers are as hard as steel, so the meeting will take place!:thumb
So everybody who wants to come is welcome.
It just takes place, because MofaFreak call me at my cell phone and kicked my ass.:lol
It doesn’t rain right now but its stormy.
That’s all, c u @ Aachen.;)

So the meeting won’t be tomorrow.
It will rain and the wind will blow very fast.
So it will be impossible to have a BBQ or to put up a pavillon and it won’t make fun to drive.
Furthermore I think that some poelpe won’t come without telling me.

The next date will be next month, so the eeting will take place!! But not tomorrow.

Gruß, Fabian

Oh, jammer dat jij niet komen kan.
I am getting out of control if more people say they can not come.

http://www.youtube.com/watch?v=7wTt-9KT3pM&feature=related :lol

Yeah most of us can speak English very well.
Oh come on guys, you can not leave keltox alone, as the only dutch one.;)

You see diac? That’s the way you should behave, too.:lol
Who else is coming?
It will be great!

You are ill on saturday. 😉

This are the people who wanted to come.

Piet 30 + Junior
Jockoballa
Farinbelarod
scattman
edition-mike
Ciaotuner 93
nuckelchen
rasierte-bravo
mav (evtl.)
Onkel Sega
Tristan
Janis
Peter (evtl.)
diac
sombrero
keltow
ritze (evtl.)
straightouttahell (evtl.)
log1c hatte mal gesagt er wolle mit mofamaddin kommen
noch 2-3…[Lees meer]

Yehaa, this sounds great!

@ diac & sombrero: It is the [color=red]18th[/color] of this month.

@ ritze: I can fetch you at Limburg’s Scoot’n’Parts (Daytona), if you want. From this point we can drive off the street, so that the police can not get us.;)

@ keltow: You can drive wherever you want except on the Autobahn, but there is not…[Lees meer]

Ohh come on guys.
It would be very nice to be at the meeting with a couple of dutch people.
Piet is even coming with his Simonini Ciao.=)
You can not be serious..I would be very pleased if anyone comes around.;)

Gruß, Jocko

I got faster than Hans with my DR Evo.=)
Can you post some pictures of the Drevo Cilinder?
Which cilinder is that?