We are going to make a 22mm flange but it is even possible to make it with a 27mm.
We have some ideas to realise both, just wait up to the next week.;)

@ terrydean: I can tell you something about the price next week.
The exhaust will not get so low and we will post dyno graphs to look how good the performance is.
But we have some justice problems with shipping to U.S. because there are different laws and we don’t want to get in trouble.

@AA-T: Yes, you will be able to drive this exhaust with…[Lees meer]

Hey Joris,
Ich freue mich über jedes Member von Vespa-Ciao.nl, das zum Treffen kommt.
Dann seid ihr schon zu 3.
Bratwurst wird es auf jeden Fall geben, und ich hoffe auch so gutes Wetter wie jetzt hier ist.

Gruß, Fabian

@ all: I am happy about every member fromV-C.nl that comes to the meeting.:)
Now there are three.
There will d…[Lees meer]

Forget the Fabrizi and Calibrata exhaust!
This one here will be much better and more exclusive.

http://vespa-ciao.nl/forums.php?m=posts&q=16868 <– Klick

We are going to build a special DN-Performance exhaust wich will offer the best performance, look and quality than every other exhaust!
Just look through the topic in the link, next…[Lees meer]

I think the exhaust will look like a mix between the Simonini Thunder of the 2007 Engine and the Calibrate, but much better!!
Beleive me, wehn I say, that it will get a fantastically good ‘racing-look’.

This will be much better than the Calibrata or Fabrizi especially at performance!!

Surely it is possible to make special exhausts for…[Lees meer]

It will not be just a DR exhaust!!!!
It will be a suitible exhaust with a better performance than the Calibrata and CC especially on 43mm cilinders and 46mm kits.
Alright mate, you’re on the list.

Greets, Fabian

If we have enough people who buy an exhaust, we are going to produce more.
Everyone can buy one and then we are going to think how much we gonna make.
I think for the first time DN-Performance is going to make 10 exhausts.
If we get more orders, we produce more exhausts.

The products are at a high quality evertime, so we DON’T use cheap…[Lees meer]

I will ask Hans for translating it in dutch again.
He said that it is allright to write in english.

If you have questions just ask.
I can’t tell you anything about the price before we made the first tests, so this will be next week.;)
The first testengine will be an original carter with 13/13 Dell Orto and DR evo.

Gruß, Fabian

We are going to start a very exclusive exhaust series with just a little number of pruductions!

http://vespa-ciao.nl/forums.php?m=posts&q=16868&n=last#bottom

Gruß, Fabian

Nice to get so much feedback here!:)
I thint we will start the first tests next week.
Perhaps I am going to drive such an exhaust at the next VCT and I hope that it wouldn’t rain as at the last one!

If we had the first prototype and sold some exhausts, we can surely make other exhausts, if you want to buy it!
Special wishes are possible everytime!

I can tell you the prices later on, if we did the first tests.
This will be a must have!

We are going to start the tests next month and than we build a prototype.
You will get the prices, photos, results and diagram papers here in this topic.
Then you can order the exhausts. We won’t give out the proportions and drawings of the exhaust,
this wouldn’t be clever. 😉

We need up to 10 interested people, who buy an exhaust, this…[Lees meer]

No, the exhausts from the photos are only examples for the good work of DN-Performance.

We will do some tets on variomatic and automatic (pulley) transmission to get the best results.
We think that we gonna use a 22mm flange for the casual cilinders with standard flange.
Special wishes and changes are possible.

I know the chief of this…[Lees meer]

Yaeh we will definately do some tets on a DR evo and the polini kit racing like I already said. :thumb
This will be at the highest level of technic and performance!
Just check the website:
http://www.dn-performance.de/

It is a cooperation of DN-Performance and me.
We will do some tests with the DR Evo and Polini Kit Racing and perhaps with MofaFreak87’s Pinasco Ciao.
I can’t say something to the price at the moment, but I will have more information soon.
If we have got more than 10 people wo buy one we will build more than 10 pieces.
This will be very…[Lees meer]

Really nice that you came the last time!:thumb
Perhaps some more dutch guys will come this time, too.
If there are enough people, we gonna have a little BBQ and waffles.

Greets, Fabian

Alright.
I gonna drive the last engine as the last VCT next year but now I have got a new cilinder.
A 43mm Polini Kit Racing in a good state with nex Polini cilinder…[Lees meer]

Perhaps I gonna organise a last meeting this year.
It will be the same location as every meeting at my school ground.

Theodor-Seipp-Strasse 1
52477 Alsdorf
Here a sattelite plan.
[url=http://www.postimage.org/image.php?v=Pq1oIqIJ][/url]

The date will be at saturday 21.11. or saturday 28.11.09!!

If there are coming enough people to…[Lees meer]

Ahhh now I know what you mean! We have to talk about that at the next tour.:thumb
But I think that this cilinder will run nice and fast.
It was my failure when I measuered the timings!:?