//Viktor

citta1234 :
In Dutch you call it `sproeier` but i don`t know how you call it in English.
You can try to dissasemble your carb and your sparker and run sow al the fuel in your motor will blow out.
Then you mount everything and then you try to start it.

It helped by me with my engines so maybe by you to;)

I’ve done that, with a drilling…[Lees meer]

citta1234 :
So it sparks, it gets fuel but it doesn`t run.
The carb may be good, but are the sprayers good?
The choke sprayer, stationair sprayer and your main sprayer?
What for size main sprayer do you have?

The main jet it something about 85 i think, if that’s what you mean with sprayer?

The rest is original, the only thing that ive…[Lees meer]

citta1234 :
Did it run anyway with the setup?
I think you have to adjust the carberator.

I remember that i got i running for about 10 sec last summer, but after that nothing.

Well i dont think the carb is the problem, it’s dead not a single sign of life. I have tried with ”startgas” to.

The carb is fixed with a restoration kit from jmpb.

[youtube=F7zgioAtKnI]

And i also fixed a pullstart! So i can start it without screwdriver 🙂

[youtube=_jb3az4BtVI&feature=player_embedded]

Don’t know how to fix YouTube on Vc, sorry about that.

Rickieboy :
Nice verry nice

Thanks! 🙂

youri :
Love it!
Beautifull wheels man!

Thanks! 😀

ciao1981 :
You must take this,There is a risk of breakage

http://i69.servimg.com/u/f69/14/29/09/52/spro10.png

Fox clutch is on it’s way! 😉

docs911 :
No. Its made for Ciao 5 spoke rims. So they will not fit on Citta rims.

And 4 spoke! 🙂

vespa-si-owner :
I have no idea.
But iam sure that most of them are in italy 😛

Haha yeah that’s for sure 🙂

tnerual :
Why are you going to sell it already? Looks like you have lot of different things in mind, but when you are so close, you sell everything…?

Just like you did with the Stage 6 cylinder and plans…? Why!

He has done this before with other projects. It’s not the first time he is quiting a project :con

niek1992 :
The only thing you have to mill is 1MM from the top, and the “ring” on the backside of the pouli’s. Then you are good to go. If you are really intrested i can snap you some pictures. But that would be tomorrow.

Thanks! Some pictures would be awesome! 🙂

Jarco :
You can mill the original disc to a custom size.
I know people…

[Lees meer]

Lastpak :
from my own experience i can tell you the proma gun is one of the best exhausts out there.
it builds up while accelerating and keeps going all the way.
therefore people describe this exhaust as an pully exhaust, because of his constant build up in the amount of rpm.
it will preform with a variomatic transmission for sure, but maybe…

[Lees meer]

Send me a pm if 🙂

Tonni :
I’m guessing you mistyped that? Or you’re not talking Euro’s here?

Oh im sorry 🙂 it was in Swedish cash witch is 175 in euro 🙂

hansieb :
Perhaps malossi is going to reproduce the Deps cilinders again, then they won’t be rare and you can cut it :lol

Haha yeah sure 🙂

kevin 27 :
but that is a big deps alu?
that`s a very precious (zeldzaam) cylinder .
i shouldn`t do that !!
it`s better but the cilinder is not available anymore!
but you need to no it self , but wen i had so a cylinder i didn`t do that

Yes its a alu deps 🙂

ill think ill skip to fix that right now 🙂 maybe later 😉

ArvidW :
Mill away a part of the cilindersleeve. Has been done many times before and works perfectly.

I was thinking that:) But I wanted to make sure that there is no problem with that 🙂

Simonini sideinleet,
19mm dellorto
Malossi big deps
polini vario
90mm clutch 🙂
Malossi too bad or Simonini calibrata 🙂

What do you guys think that the topspeed might be?

Martino :

Den har väll suttit i den ramen en gång? om du har fått ur den får du i den!

OK, i’m sure your post will be off good spirit, but keep in mind this is a dutch forum and this topic is placed in the english section. Next posts in english please so the majority can follow your movements here.

Sorry! haha forgot 🙂

Anyway thanks for the help! 🙂