What engine type features this intake?

[Dea_944tTopic starterBerichten: 87]

What type of engine has this intake?
Seems a bit problematic to drill this one to 13mm…..

http://www.ladda-upp.se/bilder/msibqhljeifkgp/

/Dea

[Wilk1985ModeratorBerichten: 3729]

This inlet is usually found on the latest 25 km/h models and is designed to make tuning more difficult.

It is hard to drill up to 13mm, but not impossible.

If you are drilling it up, make sure no small steel parts remain in the inlet as they can come loose later.

Link naar Mijn collectie / Projecten.

[Dea_944tTopic starterBerichten: 87]

But the alu-part of the inlet doesn’t look to be 13 mm?

/Dea

[zevenenergieDonateurBerichten: 4167]

The nylon part belongs to the caburateur.
Take it off and you wil see a normal intake whit a small hole:! I hope :lol

[ritzeBijdragerBerichten: 3421]

dude listen8)

*you`ll need a dremel (hi rpm milling machine)
*little grind stones (spheres)
*and a good propane or whatever burner

you need to grind it all the way thru the middle
at a certain point you will see color change, then you know that you are all the way thru the little steel pipe

heat the inlet up and remove the pipe with some tools 😀

you also need a good (white) to see the color change when you are hacking away at it

De budget beun tjoener: geen geld is te duur of het werkt nog niet
Link naar Mijn collectie / Projecten.

[Dea_944tTopic starterBerichten: 87]

Ouch… I completely missed that it was the plastic part from the carb….. :D, I thought it was a completely different inlet type that was thinner…. (I actually don’t have the engine yet, it’s on its way by mail)

/Dea

[Gebruiker]

<i class="fa fa-comments-o" aria-hidden="true" style="font-size: 20px;"></i>