Malossi crankshaft

[frandecoolTopic starterBerichten: 43]

Can i use the malossi scrank shaft in my polini evo engine.
http://mopshop.de/shop/product_info.php?cat0=441&cat1=496&cat2=1712&cat3=TW90b3J0ZWlsZQ==&products_id=3030&osCsid=8aef7ea74538be0e12e92e2fa72d78b7

[eddiBijdragerBerichten: 307]

I think this malossi crankshaft wil fit, yes.

but there are alternatives, for example, mazuchelli..

[Rebel]

Sure it will fit
but if you have no good reason for it i should’t do it

you cant drive with poulie anymore (you need to drive vario with it)
And the (spietjes?) (crankshaftpspiel?) are about 12 euro so i rather choose a mazuchelli then

[frandecoolTopic starterBerichten: 43]

Where can i by the mazuchelli chrankchaft:)

[frandecoolTopic starterBerichten: 43]

He he i found it 😀

[MillenBijdragerBerichten: 114]

You don’t need vario for the Malossi crankshaft, it works perfect with pully aswell, you just have to make some modifications on this part: http://mopshop.de/shop/product_info.php?cat0=441&cat1=496&cat2=1712&cat3=YWxs&products_id=1499&osCsid=e13ee0cc524b99ca6cb172b3dff9c9e6

I see you’re from Denmark frandecool? You just have to “fila upp” (that’s swedish words, I don’t know the words in english but I hope you’ll understand since you’re from Denmark :)) the hole in the middle of that piece and it will work just fine. Just make sure you don’t “filar upp” the hole too much, and don’t make the hole round, it shall be the shape it always is, just bigger.

Maybe it sounds kind of difficult cause I suck at explaining things, but it’s really easy.

[Rebel]

So you only need to make changes to the ground plate?
by making the hole bigger?

[.-{2F4OV}-.]

I should take the mazzuchelli with pully or the malossi and buy vario transmission;)

Vario is way better

[MillenBijdragerBerichten: 114]

Rebel :
So you only need to make changes to the ground plate?
by making the hole bigger?

Exactly

[eddiBijdragerBerichten: 307]

.-{2F4OV}-. :
I should take the mazzuchelli with pully or the malossi and buy vario transmission;)

Vario is way better

Frandecool already has a variomatic transmission;) so, he can choose between both crankshafts

[N0S15BijdragerBerichten: 3]

I have a question about the Malossi MHR nut which includes with the malossi crankshaft. The one I have is torn and come loose when I drive. SO my question is if I must buy a new one from for example Mopshop, or if I can find it in a oridinary ironshop. Do somebody know?

[G-noDonateurBerichten: 1735]

you can find it in an ordinary ironshop, it’s the nut you fasten with keky nr.13 (M10?)

[Rebel]

You cant use other cranckshaft screws for it 😉 remember that becouse you will make your screwwire dead.

[N0S15BijdragerBerichten: 3]

There is a special nut for the crankshaft. I know that. But my question was if i could find a similar nut in a ordinary ironshop. But probably I can’t. It’s just that 10 € for a nut is kind of expensive.

[Herr FlickSleutelbeheerderBerichten: 6901]

Yip it is, just like the “spie” it is also special

46 Pinasco, Malossi RV, Schijfrem, Fox Vario
Gele Racefrikandel

[Gebruiker]

<i class="fa fa-comments-o" aria-hidden="true" style="font-size: 20px;"></i>