Joes random builds and projects

[zevenenergieDonateurBerichten: 4167]

Thats a verry nice looking head.

[CrullieDonateurBerichten: 2279]

Always a great pleasure to admire your artwork and crafts, keep it up and have fun Joe

TICKLING BARN

[JoeTopic starterBerichten: 105]

My buddy that I made the head for also gave me this ciao frame that has been cut/modified by a previous owner. I did the hybrid shaft conversion and cut the frame for the pulley to fit. The plan is to stretch the frame to run the si length belt.

[JelleModeratorBerichten: 5842]

Why stretch it to Si belt and not to Bravo belt?

[JoeTopic starterBerichten: 105]

I have some extra si length belts from the malossi over range kit.

[TIES3930BijdragerBerichten: 24]

Nice work!

Love the water cooled head you’ve made, clever design!

Gr, Ties

[JoeTopic starterBerichten: 105]

[JoeTopic starterBerichten: 105]

We just had our 4th rally.

I rode my mini grande, it did well besides a leaking transmission. I’m hoping it was coming out the overflow.

[JoeTopic starterBerichten: 105]

I also picked up a set of these 3 spoke wheels we didn’t get them on the us models. 

[zevenenergieDonateurBerichten: 4167]

Is that dice for making a diagnosis? 😉

[JoeTopic starterBerichten: 105]

haha

The leak was from the input shaft bearing pushing out of the transmission. Mcproparts recommends one with the oil hole I replaced it with a standard one with loctite bearing retainer. Hopefully it stays in the housing now. I noticed I cracked my rear wheel while I had the transmission out so I laced a spoked wheel until I can find a replacement snowflake.

[zevenenergie]

I kind of like that spoked wheel and the yellow It looks neat. Like so many of your individual solutions. How the moped looks as a whole (how shall I put it) never ceases to amaze me. 😉

Tanks for your input, I appreciate it and I think everyone does.

• Deze reactie is gewijzigd 4 maanden geleden door zevenenergie.

[Daniel citta 0.5BijdragerBerichten: 53]

What kind of rim did u use and what’s the size of the wheel kinda liking it

Burn rubber not your soul

[JoeTopic starterBerichten: 105]

2.15×12 with 75mm spokes

https://www.aliexpress.us/item/3256809251972484.html?spm=a2g0n.order_detail.order_detail_item.4.d6b4f19cvyIoyd&gatewayAdapt=glo2usa&_randl_shipto=US

[JoeTopic starterBerichten: 105]

I had a buddy mention you can use a Kinetic ignition coil with the stock US flywheel and a parmakit cdi box to add a cdi to the points cases. The downside is the US flywheel is 1300g. I was wondering if I could cut down a kinetic coil on the lathe to work with the euro points flywheel which is 700g. I have spark with the setup I need to get the engine in a bike to see if it actually works.

[Gebruiker]

<i class="fa fa-comments-o" aria-hidden="true" style="font-size: 20px;"></i>