Freakz SI Perso

[Tiesman1986BijdragerBerichten: 861]

But can you also move your engine? My vario is taking the whole plate. When I make it shorter the disk are not closing completely.

[MofaFreak87Topic starterBerichten: 224]

no I can’t move the engine more to the back. Its at the end.
Are you serious that it is not better ?

i drove jesterday around 40km and rested the pump.
first with a Pulley 60mm on the pump and later with a 48mm one.

I never get above 90 degree!
Not it is around 75-85 degree. Depends on how aggressiv I drive 😂

i think it was a good idea to change the pump

[Tiesman1986BijdragerBerichten: 861]

I think we miss understand Haha.
The belt is perfect with mine 110mm.
I can’t make it tighter then the disk dont close any more.
But if I understand right you can move the engine more to the front to tighter the belt.

[Tiesman1986BijdragerBerichten: 861]

Hope you can see it here

[Seru.chBijdragerBerichten: 54]

He has 2 rolls an the frame, this makes the belt shorter.

[MofaFreak87Topic starterBerichten: 224]

You are right!

1. First rule for tuning:
the screw belongs on the carburetore!
And NOT IN the carburetore!

2. i changed Main jet, and some little other things.
After that I removed the rolles, and the transmission is a little longer now. But there are another mm missing!
But the top speed is now a little better. Before I had no Handy with me and my speedo said 5-10kmh more

but I don’t care. With a hot engine 99.3 GPS measured Km/h is a good finish for the day

my naighbours hate me now.
I drive 15-20 times to the garage and back to the fields Hahaha

now it is time for a beer!

---

[Tiesman1986BijdragerBerichten: 861]

Hahaha Nice going ! Yeah I think you result for a fast engine and tour able is a fact ! Think we should drink some fruh together hahah.
And mine neighbors are use to it now :p

[MofaFreak87Topic starterBerichten: 224]

Hey Volks,

next week im going to the Münster Tour at Wevi.
So i have to pause the house renovation and start to make some maintenence work at the grey devil.

Actually i have more than 400km with the new Polini Sport on my Speedometer and everything runs already fine and smooth.
there is only one thing.
when i push my bike without running engine some meters theres a noise in my gearbox.
i hope it is only the bicycle push button which scratches at the gear.
but we will see at the weekend, because i have to change also my back tire and i need some new discs for the back break. after running more than 4k km it is just dead 😀

tomorrow i will show you some Pictures

have a nice Friday and a f***** great weekend!

[MofaFreak87Topic starterBerichten: 224]

So here we are.
new tire
new disc
new break pads
gearbox refreshed

and the top Point i shorted my frame so that the belt sits Perfect now.
Down At the Fotos you See a before and After picture from the clutch.

first ride, i had to Chance the waights. They Were 1 gramm to light After shorten the Frame.

then the next ride. But i did not get over  89kmh…..
what the f***** i thought
before it was running 95 without laying down.
with laying down 99-100

back at Home i found the mistake

OMG

the break was under permanent air pressure from pushing the break saddle back  grrrrrrr

on monday i will change a Little Bit the carbureatore settings. Its way to rich in the lower rpm…..

[Tiesman1986BijdragerBerichten: 861]

Nice ! So now you belt fits perfectly 😎
Hope you have this winter some fun stuff 🙂
It’s nice to see your back on track !

[MofaFreak87Topic starterBerichten: 224]

A Little service at the Carb and made everything ready for touring
8L Tank so that i dont Need to refill at the fuelstation  hehe
the First Test Drive was 99km/h again.

im really happy now with the Performance

[Gebruiker]

<i class="fa fa-comments-o" aria-hidden="true" style="font-size: 20px;"></i>