Ciao Koppeling

[Schucha]

Hello everyone,

My Mono-Ciao C7E1T
original unmachined engine case

63cc Polini

13/13 carburetor with 66mm jet

Malossi air filter

Original Piaggio moped exhaust

Original clutch springs

new clutch pads

new belt

It runs very smoothly once it’s started.

I have to ease off the throttle so the clutch can engage properly, and then gradually increase the throttle to reach top speed.

The belt is properly tensioned, there’s no play and no sagging, and of course, no oil or other lubricant on the affected parts.

The clutch pads are new.

I’ve already tried harder springs (Malossi set), but then the engine revs even higher when starting, and the Ciao doesn’t move at all; it just revs up when stationary.

 

Can someone please help me ?

with this?

Thanks and best regards

• Dit onderwerp is gewijzigd 6 maanden, 4 weken geleden door Schucha.

[niek1992BijdragerBerichten: 1882]

Do make that video, but in the meantime, make sure the steel balls are properly touching the plate that bolts onto your crankshaft. Sometimes they’ll end up pinched in a wrong way, causing the segments to not move freely.
Obviously stock springs would result in RPM engagement at around 2500rpm (or so i think). You’l probably be better off with Polini Blue, or the Malossi equivalent.

[SchuchaTopic starterBerichten: 12]

Please Check the link. Here you can See what i mean. The Clutch hast noch grip

[WimBijdragerBerichten: 3364]

Sounds like the belt is slipping?
Or the segments can not move free like niek92 said.

Gr. Wim.

Een oude brommer is alleen leuk als sleutelen uw hobby is.

[SchuchaTopic starterBerichten: 12]

Belt is strong, Segments i am checking, also ordered a complete new Clutch will arrive tuesday i will let you know

[bram0vitzBijdragerBerichten: 771]

Are you sure the belt isnt too tight on the clutch?
Drivebelts need a tiny bit of play on them.

beetje prutsen hier en daar
Link naar Mijn collectie / Projecten.

[SchuchaTopic starterBerichten: 12]

It is very tight, so maybe thats the Problem. I will Check After Work

[SchuchaTopic starterBerichten: 12]

Works belt was loose …

[bram0vitzBijdragerBerichten: 771]

Good that it is fixxed now 😎

beetje prutsen hier en daar
Link naar Mijn collectie / Projecten.

[WimBijdragerBerichten: 3364]

Ah, dissapointing. Haha. We think with you a few days.
Next, make sure everything is oke and dubbelcheck three times, than ask   😉

Gr. Wim.

Een oude brommer is alleen leuk als sleutelen uw hobby is.

[Gebruiker]

<i class="fa fa-comments-o" aria-hidden="true" style="font-size: 20px;"></i>