- Dit onderwerp bevat 5 reacties, 3 deelnemers, en is laatst bijgewerkt op 15 jaren, 8 maanden geleden door .
-
<i class="fa fa-comments-o" aria-hidden="true" style="font-size: 20px;"></i>
-
O.k, just looking at my new Malossi Multivar here, and i can’t work out where the
plasic ring (0812673B) goes, if you put it where it shows in the parts book the pully
won’t go small enough to nip the belt.throw it away.. you don’t need it
O.k, thank’s for that, the Malossi instructions are crap, they will be usefull to start the fire!
Also, do I need to grind off those bit’s of the yellow spring that stick out about 5mm from each end?
my old spring doesn’t have them.If you have the holes in the clutch where you are supposed to put the pins on the spring, you can better leave them and use them.
The spring will stay in place better if you do so.
If you don’t have the holes, you have to grind them off.<3 Thunderstone
Check mijn perso!My clutch has has no holes in, the spring will sit nice in the clutch with those bits cut off.
Thank’s for your help, i’ll go and put it all together now!Good luck and have fun
<3 Thunderstone
Check mijn perso!
- Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.