- Dit onderwerp bevat 18 reacties, 7 deelnemers, en is laatst bijgewerkt op 19 jaren geleden door .
-
<i class="fa fa-comments-o" aria-hidden="true" style="font-size: 20px;"></i>
-
Hallo.
How big a Sproeier should i use for my new kit.
Malossi 46,5mm
Polini evolution engine with 19mm dellorto
The Sproeier that sits in at the monent is a 70*EDJUH*: Sproeier= Jet*
try 85-90
46 Pinasco, Malossi RV, Schijfrem, Fox Vario
Gele RacefrikandelThanks i will try that,because the engine will not take full throttle.
That’s exactly what a friend of mine also has with his evolution engine! If you got it tuned right, could you post your jet size here?
I think you should try a 90 and a good filter (not the original one, that one sucks big time). but if you use the original one you should try 80. but watch out before you buy a filter, first see if it fits! couse i’ve bought one with a kind of plastic cap on it and it doesn’t fits with the cap. so i had to remove the cap but now it sucks to much air and it can’t be tuned right.
so jet number 90 and a good filter. couse i’ve got exactly the same problem and i think that should be the good combination of jet and filter.
in the beginning too much throttel and the engine stops running right?
iv’e got this setup:
polini evolution engine
46mm polini(so clad 80cc)
and the 19mm dellorto whit a 90 Yet.
and i use the original filter.
and it drives pretty well.
but i got a variomatic on it.
i wish you luck.I think that i will try the 90 jet ,because with the 70 jet the engine will not run with filter on.
I think that it dont get enough gasoline because, when i ride on the bike and stops the engine goes out(Stops)
I have ajusted the air jet and all the other things on the caburator and still it runs better without filter on.:con
It is by the way also very hard to start
i know the problem.
because i got the same problem.NOw i dont get it. You wright that you have the same problem but still you have the filter on, and i dont have it on thats not the same:con
the point is: buy another filter. the original one sucks.
frandecool :
I think that i will try the 90 jet ,because with the 70 jet the engine will not run with filter on.I think that it dont get enough gasoline because, when i ride on the bike and stops the engine goes out(Stops)
I have ajusted the air jet and all the other things on the caburator and still it runs better without filter on.:con
It is by the way also very hard to start
Normally you need a bigger jet if you are riding without an airfilter. With your moped it is the other way round 😕
AW50-4t | 13.13 | Gianelli Citypower | 3.2Nm@6000rpm | 3.0pk@6700rpm
Home made engine dynoHey there.
Yesterday i have put a 85 jet on my bike, but it will still not run whit filter on.(The orginal one for EVO engine)
Should i go op in sice 90-95? Or what will you do…. Help wanted 😕
if I were you I would buy a malossi or hebo powerfilter because the filter of the evolution engine is not good:P
no, hebo sucks. the malossi filter for the Reed Valve is very suitable for it. and i should try a 95 jet. it got to be somewhere around that ;).
Are there not anyone that use the orginal filter for the polini evo engine.
- Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.